Description
Content:
- 1x MTC14 circuit board
- 2x LED board
- 1x MTC14 to NEXT18 adapter
- 1x cable
Manual V2: follows
Assembly of V1:
Before placing the circuit board, solder the LED PCB to the ends of the circuit board with the wire provided (The different solder pads have a number or letter). Bend the LED PCB 90 degrees so that it is now forward. Now insert the circuit board into the plastic chassis. Connect the decoder board to the circuit board with the flat wire and install the decoder. The metal chassis can now be mounted after applying a piece of insulating tape to the areas where the LED prints and the space above the decoder. Remove the light guides from the hood and fill the holes with Crystal Klear. The cap can now be installed.
Function outputs:
Front – front lights for
Rear – front lights rear
Aux 1 – center pit front
Aux 2 – center pit rear
Aux 3 – marker lights for
Aux 4 – rear tail lights
ammar (verified owner) –
Prachtig product, voor de fan van de motorpost een welkome upgrade!
Comfortabel omgaan met soldeerbout en CV’s is een pré.
De NEXT18 adapter i.c.m. de ToM Lokommander II werkt goed (maar de adapter zoals aangegeven met zorg monteren).
Voor wie er mee geholpen is en ook deze combi kiest:
* CV122=0 (disable SUSI)
* CV33=26, CV34=37 (standaard front/sluit op F0)
Bert (verified owner) –
Geweldige print, makkelijk te installeren en een geweldige upgrade voor de MotorPost.